Hi,
I’ve installed Newspaper baby blog and setup revslider on pellerini.com. Then went ahead and selected 2 categories. Both have more than 40 posts in them. But still slider not appearing.
Please help
Hello dezbee,
The baby blog demos use a revolution slider element. Please install the plugin like so: https://forum.tagdiv.com/how-to-install-revolution-slider-v5/ and then use this guide to import the baby blog slider:
https://forum.tagdiv.com/import-revolution-sliders-on-demos/
Thank you!
Do you respond to queries without even reading them?
Let me copy my question here again for you with highlighting the part you didn’t bother to read.
I’ve installed Newspaper baby blog and setup revslider on pellerini.com.
Then went ahead and selected 2 categories.
If you read between the lines, it clearly says that I have installed Slider Revolution element. And I have selected 2 categories means I have already imported the demo slider from my download folder and then configured it to show my posts.
Now do you have a solution? 🙂
Hello dezbee,
Please send us an email at contact@tagdiv.com with your log-in information (wp-admin) so we can further inspect it closer your setup page. Also, provide there the link to this topic so we can quickly identify you. I need to inspect your setup page with Revolution Slider so I will be able to provide a more accurate response.
Thanks for your understanding!
Done.
Now as per your suggestion, I created a new page, added slider and the rest of stuff.
Here are few problems that I see:
1) If the title of post is a bit bigger, it runs over the category and author name. See here: https://snag.gy/7mvpcH.jpg
2) I have added recent posts block but the thumbnails aren’t showing up properly. Their size is so small. See here https://snag.gy/7mvpcH.jpg vs. Your Demo (https://snag.gy/rZRk2f.jpg)
The thumbnails are appearing properly on the homepage now, as the current homepage is just showing latest posts. Is there a way I could display similar style posts on static page? I have checked every single block template but didn’t find anything similar.
3) Why is widget title different on this static page? https://snag.gy/VaXoxU.jpg As compared to the rest of the website (https://snag.gy/gIpcQX.jpg)
Hello,
1) I cannot find the revolution slider element anywhere on your site. Please provide a link to it so I can inspect the slider.
2) The screenshot is not the correct one but I suspect you selected a different module for your latest articles section. It can be changed from the post loop settings: https://forum.tagdiv.com/page-templates-2/
3) You can select a different block header for each element in the bapge builder or the widgets area. There are 17 to choose from: https://www.screencast.com/t/Vq53qeenDK
Thanks.
1) The page where I took screenshot from isn’t live yet. I sent the login details already to contact@tagdiv.com and they created that page in drafts named “TagDiv Composer Draft”. Please check.
2) I have figured out.
3) Figured out. Thanks.
replied via email
What? No response from you in my mailbox.
https://www.screencast.com/t/1KK45CMktJk
You need to create a static page and then place the shortcode in that page. I thought you got it. Please let us know if you need further assistance.
If only you guys could read the question before responding.
Your message above is answer to nothing.
Here is my question again, for your convenience:
1) If the title of post is a bit bigger, it runs over the category and author name. See here: https://snag.gy/7mvpcH.jpg
The static page is already created. Shortcode is added. The page is in drafts. You asked me for admin access and I told you, you guys already have my login credentials in your email.
Then you come back with a response that is totally irrelevant.
What???
No response?
Hi,
Sorry but we do not work on weekends. Please check the support hours in the top right of the screen.
Please edit the slide in revolution slider and decrease the font a bit so the title does not fall on 2 rows as the elements on the slide are not dynamic. They have an absolute positioning coming from the revolution slider plugin.
The alternative solution would be to remove the author of the post on the slide or to change it;s position in the slider to be on the bottom of the grey area so if the title should fall on 2 columns, the author would still be seen underneath.
Thank you!
Thanks for your response. I would definitely want to go with the alternative solution. Can you tell me where do I hide Author name and Category from slider? I tried to find but couldn’t.
I just want to display post title in slider.
Hi,
You will have to edit the slide and remove the author name from it, or position it lower in the slide. Select the slide mentioned and edit it
– https://www.screencast.com/t/jBjHih7LYdF
– https://www.screencast.com/t/0JFDp8Qph
Either delete the author name and category completely, or perhaps drag the layer lower
– https://www.screencast.com/t/TCTpdquib
– https://www.screencast.com/t/Je3SGgM3dIkG
– https://www.screencast.com/t/LvRJsz1rSymx
The Revolution slider is a very complex plugin, with an enormous amount of settings and features. It can be difficult to use at sometimes. This is a link to the official documentation
– https://www.themepunch.com/revslider-doc/slider-revolution-documentation/
Thanks
Thanks. All set.
Is there a way I can customize social sharing buttons? Like add/remove. I would like to add stumbleupon button.
https://snag.gy/BbzW4n.jpg
Hi,
At the moment there is no option to add socials in the post sharing. That button could be added by editing the file where the post sharing is defined, and entering the button code manually
– https://www.screencast.com/t/njxl3XWvB
– http://www.stumbleupon.com/dt/badges/create
Or maybe it would be easier to use a social plugin that may have the option to display such a button.
Thanks
