Hello.

Thank you for your advice, I implemented it. The ads started loading a little faster. But previously, the top ad blocks on gif2you.com load much later than the content, which is why users do not see the ads and scroll down until they load. Please advise me how I can make the ads load before the content, like on the sunshinepic.com website

For comparison, two pages:

https://gif2you.com/good-morning-images/ – the ads load after the content loads
https://sunshinepic.com/pojelaniya-s-dobrim-utrom/ – the ads load before the content loads

Thank you.

Hello.

Thank you for answer.

I apologize, can you explain it to me too, I didn’t fully understand your advice… I have a block at the top of the category that loads after the content, including after the theme elements – https://monosnap.com/file/NxfXjk05PJPLQAAZ3KANf0h639AgAk
There is also a block at the top of the post that also loads after the content – https://monosnap.com/file/wHkgTWg4ERwXTfdXUxNJbfdkWsNHGR

On your screen, I see this page, I have the statistics code inserted there – https://monosnap.com/file/tFzcH2gTJ8mUcdrb3fsSIyg0CmXfWw

Please clarify what you mean? Duplicate two adsense codes here, in the place where the analytics code is?

Thank you!

Hello.

Thanks for the advice. I contacted my hosting support and here’s what they said… “On my part, I was unable to find the reason for the long loading of advertising iframes. The check was performed at different times in different browsers.”

I have a guess… Could the order of loading content on a page be the reason for the different ad loading speeds? This is what I saw using the developer tool in Google Chrome – https://monosnap.com/file/Hezcn1M4nT0epCFJsDvO4fCYN2tw9t

Do I understand correctly that in the case of one site, the ads are loaded after the content, and in the second before the content.

The theme templates used are identical.

The same situation with the formation of post pages.

Please tell me how I can make the ads load before the content in gif2you.com?

Thank you.

The issue has been resolved. Thank you for your help.

Hi,

Please tell me, did you receive the letter?

Thank you!

Hello,

Yes, sure. I sent a email.

Thank you!

Hi,

I did this and it visually solved the issue of reducing the margin.

But there are concerns that this solution leads to overlapping blocks in the code – https://monosnap.com/file/X3A5XH4SvInJOhxWbIJXBkupn1TLGg

I am afraid that this may negatively affect the performance in Adsense and sanctions on their part.

Is there a way to not add any margin when filling out this form? – https://monosnap.com/file/RzatpPdspBsYK8J0Hn7AePXq4BXrLV

Thank you!

Hello,

The bottom margin value is 0, which is exactly how it was configured – https://monosnap.com/file/rwXSV6ERqRTM6EEfCTDbnpglRGFzpg

The top margin value in the Posts Loop block is also 0 – https://monosnap.com/file/fQtOikOvd5lHRNiqIxl2kRgxkeKMqv

Cache cleared in browser and cloudflare.

The result is the same – https://monosnap.com/file/lujM0TN5FRj7tPCpscktd5qNghCRt5

Thank you!

Hello,

There is no margin in the ad code – https://monosnap.com/file/HM7Cv2snnoxkSb9QM4hzYK3mAMouh5

I think this margin is generated at this location – https://monosnap.com/file/RzatpPdspBsYK8J0Hn7AePXq4BXrLV

This is confirmed by the fact that when I insert the ad code in the “Custom ad” tab, this margin is not there:

https://monosnap.com/file/fr0ENXJN5GVqDexfgKkpwXwLn0K6Fg
https://monosnap.com/file/bcOK2GjDL837fHSCAhx62M9dGuIJK2

Thank you!

Hello, Bettina.

Cleared the browser cache, cleared the CDN cache, disabled the CDN. The situation has not changed, the switches from the theme panel settings do not create a result.

Sent a letter on contact@tagdiv.com

Thank you.

Hello,

The settings were saved from yesterday and have not been changed – https://monosnap.com/file/33M2CsIvHNFFWEu0z0FfsCwq1FJPgh

The cache was cleared yesterday and today in CDN CloudFlare and Browsers.

Additional I paused CDN on site.

Same result – the gap has not changed – https://monosnap.com/file/aiZsdvKHsGjgL96bebYjFICq3oMGdF

Thank you!

Hi,

Thank you for answer!

After setting the value to 0, the gap is reduced in the preview of tagDiv Composer – https://monosnap.com/file/WZSeLGv7w2HikgqY5PtZPx7K54RjeE

But there are no changes to the site after saving – https://monosnap.com/file/v2xLS6o9DH6YnS4irT1ZPffjICn20X

Thank you!

Hello,

Thank you for answer!

I didn’t mean gap in module “posts loop”. I mean gap between ad box and posts loop – https://monosnap.com/file/RGoghaUXPRqX6a25vLrSg2RuRWQs1F

I can’t reduce it.

Thank you!

Hi

Sent the data.

Thank you.

Hello Bettina!

Thanks for the answer. I did as you recommended. The result is the same.

Thank you!

Thank you for answer.
As I reported earlier, the offset field is worth 2. I have on the page 2 loop posts.
1 Loop post – Offset posts: empty
2 Loop post – Offset posts: 2

But they look the same after posting.

I have the latest update of the theme and plugins.

Thank you.

Hi.
Thanks for your reply.
Clearing the cache did not work.
Additionally, I viewed and cleaned it in two different browsers.
Recreated one of the categories. Meta information remains on the modules.
The switches in the theme panel do not work (theme panel>block settings>meta info on modules/blocks).
Help please.
Thank you!

Wow
You are super! Thanks for your professionalism.
Everything worked out)

Hi)
Thank you for your answer.

This is website – gif2you.com
This is category, like example – https://gif2you.com/good-morning/
This is what i mean about title of category that i triyng to hide – https://monosnap.com/file/LWfygpy3a6dSp4sAziHgg4fiBJ4GYb
Can I hide headers in categories?

About “read more” buttons in categories… Same category for example – https://gif2you.com/good-morning/
This button that meant – https://monosnap.com/file/0W6J39SEAxPHbMoicNsZ13rbIh9CKB
I have tagdiv Composer – https://monosnap.com/file/vvs0MR97SbisHrKzHXCkwFqZ4sd8KN
But I can’t find how to use it for standard categories.

Thank you.

Thank you for help.

That’s great. Thank you for your help! How did you do that? Will this need to be repeated after a theme update?

Hi,

Done.

Thank you.

Hi,

i got an answer…

550 5.1.1 The email account that you tried to reach does not exist. Please try double-checking the recipient’s email address for typos or unnecessary spaces. Learn more at https://support.google.com/mail/?p=NoSuchUser q9-20020ac25fc9000000b004cafb4ded24sor297425lfg.68 – gsmtp

Thank you.

Hi.

I deactivated the plugins, cleared the cache on the server, cleared the browser cache. The situation remains the same, I can’t edit the “Translations” page.

Thank you.

Hello,

I found this phrase. I can’t replace it, remove it, or highlight it. All fields are inactive, not editable.

Thank you.