Hello Simion,
Thanks for your respond. Yes, the plugin was deactivated as a temporary workaround.
After I activated SWIS again, the photos are cached normally.
As far as I understand with the next photos added, the cache will not update new images and they will be unavailable, as before. So let me wait until the new photo will be published on Instagram so I can try to clear cache manually and tell you the result.

In EWWW lazyload is deactivated since this is a photography site. But I will try to play with it.

I will update the thread in several hours or few days.

P.S. Looks like I forgot to post a URL to the site with the issue, but you correctly pointed it out. Thanks.

• This reply was modified 1 month by Sergey.

Hi Anamaria,
Sorry for long delay.
My question, whether there was a solution to add Instagram block to web site? It was a very useful feature. Calin wrote in his previous message on March 18 that your team is working to resolve the problem. Do you know if the problem has been resolved or not? Because my Instagram block is still hidden.
I use latest Newspaper 12.6.5 and business account of Instagram.

• This reply was modified 2 years by Sergey.

Hello Calin,
Was there any solution for Instagram linking? It is still not working at my side.
Thanks for update.

Hi JMcK1000,
You cannot add a Personal IG account anymore due to restrictions of IG. I have converted my account from Personal to Business. Then I added it in the Business IG section of TagDiv template. At first it did not work. But after I removed both the Facebook and the Business account, I connected both of them again and it worked. (Note, I did not remove FB account connection)
In the Personal IG section there is still the old outdated account connection. I cannot remove it, but I do not use it. So I am fine with it.

P.S. I am not from a support team.

• This reply was modified 2 years by Sergey.

That’s what Geekyelephant says. The button does not work. Nothing happens.

Hello Anamaria,

I have partially solved my issue.

I have disconnected FB account, then I disconnected IG Business account and connected both of them again. The front end immediately started to work as expected and my IG posts are shown.

On the back end I still have IG Personal account connected and expired. I cannot disconnect it. But so far it does not prevent from loading IG Business account, which is a very useful feature for art-related businesses. Therefore I have no any issues with the theme.

Thank you.

I have absolutely the same problem. I just subscribe to new replies.

Hello Bettina,
I have sent an e-mail to the indicated address. But no reply since then. How can I check if the message successfully reached you?
thanks

Hello Bettina,

Mine was set to Translatable (fallback to original language), which I use at other sites successfully. But I tried to change to Translatable (only show translated content) and it does not work neither.

Are there any other ideas?

I will add a video link for better understanding:
https://www.loom.com/share/dc374acfdc6b4311b794424328d3da0d?sid=33ac7c86-143b-4552-a376-856af4f43a9b

Hello,

Sorry, but due to many other issues with WPML and Newspaper, I have decided to recreate the web site from scratch. So, please close this ticket.

FYI, I also contacted WPML support. We did the below exercise with them. But the issue persisted with minimum set of plugins. So they advised to contact TagDiv support.

I kindly ask you to follow these steps in order to isolate the cause of the issue:
– Create a full backup of the site
– Update any outdated plugins or themes
– Flush any cache memory that might exist
– Deactivate all plugins, including the WPML ones
– Activate a default WordPress theme, like Twenty Twenty
– Activate the WPML plugins
– Create a test page in Russian and check if there is any error
– If there is no error, then activate tagDiv Composer
– Create a new test page in Russian
– If the issue disappeared, start by activating the theme and then the rest of the plugins, one by one, until the issue appears again and you find the culprit

This is actually my topic. But it is not related to this issue. I don’t understand why do you refer to it? Because I create the page manually from scratch. It is not about translations and not about base64 issue.

As I explained in my original message, I cannot translate it using WPML editor. If I follow your method I get this endless page: https://prnt.sc/7Rp-RN2ai6Y2. So this part of your recommendation did not work.

But I appreciate your support because your trick with duplication and the following change of the language worked! Now I finally have two working templates in both languages.

Thank you.

Thanks, that worked.

I want to mention that I have added base64 to the XML configuration file as per below code. But it did not help. The same error appears with reference to the same tag and attribute (vc_raw_html: content:).

<tag>vc_raw_html</tag>
<attributes>
<attribute encoding="base64">content</attribute>
</attributes>

I read about how to correct it here:
https://wpml.org/documentation/translating-your-contents/page-builders/how-to-fix-encoding-of-fields/?utm_source=plugin&utm_medium=gui&utm_campaign=wpmltm

I searched support forum of Gutenberg and found a message where they say that it is not behaviour of Gutenberg: https://wordpress.org/support/topic/html-anchor-tag-auto-populating-for-headings/.

In that thread the customer also pointed out to Yoast SEO plugin that created this problem. So, I contacted Yoast SEO support, and they told me to try to switch the theme to identify whether it is a problem of Yoast SEO or of my theme.
https://wordpress.org/support/topic/anchor-id-in-header-is-overlapped-by-header-name/.

So, I tried to switch the theme from Newspaper to Twenty Twenty-Two. And the issue has gone. Custom anchor ID appeared in the HTML text of the page.
When I switched back to the Newspaper theme, the anchor has gone again.

Do you still think it is not a problem of Newspaper theme?

I have not received any response since that time.

Hello,
Noted. So, I can translate all cloud templates except for header.

Hello,
Yes, after I close/refresh the stuck window and enter the template again, I see that the changes are saved.
Yes, this issue happens only to header. It looks like no other template was affected. I guess it is because the content is encoded totally as base64 (it looks like any other template is not base64).

I sent you e-mail with my credentials. Please check it.

Hello
You say that I need to translate/duplicate cloud header for each language.
But as I wrote above, that is my problem. I cannot do it because the header is encoded in base64.
I was promised compatibility of Newspaper theme with WPML but it does not look to be fully compatible. How can I translate/duplicate cloud header from one language to another language?

Regarding your new procedure, I tried it. But the theme leads me to the translation screen with only one field: name of the header template.
Please see the screenshot:
https://prnt.sc/1kY-7ny3kdBh

I

Hello Calin,

Thanks for your reply.

1. I read the guide at the link you offered. However, I did not find anything about how to cope with header cloud templates. Moreover, the guide is outdated, and I cannot follow it. The guide shows a screenshot from the cloud template page, where there is a possibility to add new languages (clicking on a plus icon). However, in the latest version of TagDiv/WPML there is no such possibility (see the screenshot at the link https://prnt.sc/uXbaWpcIw1vi).
To add another language I use WPML’s translation management menu. But the header cannot be sent because of base64 encoding.

2. Another solution with online decoder I don’t understand. I have decoded the content of the header cloud template. And what do I do with the decoded text? I can see there a lot of base64 decoded attributes, such as tdc_css, flex_width, f_descr_font_size, content_general and others. Some of them are located under the tags, which are not existing in the custom XML configuration tab. Do I have to add all of them (including new tags) to custom XML or what?

Can you explain why the developers decided to block many popular domains, including .group? What is the reason to do that?

I think you provided the wrong screenshot. It describes how to generate name and family name before @.
However, My format before @ corresponds to [first].[last] as described in your screenshot. I do not have any issue with that.
My problem is that the WP or the theme do not validate e-mails in the format [whoever]@[domain].group
At the same time it validates
[whoever]@[domain].work

So, how can i exclude this unnecessary extra validation from the theme?

Hello Bettina,

Your solution did not work. Using my browser’s inspector, I can get a class (something like tdi_148) from a page and assign “display: none;” to it. But on another page this class will be different. So I will have to manually add more and more classes for every single page. Moreover, I may have several “Related article” blocks in one post.

Finally, I created my own classes and assigned them to each shortcoded element using the field Extra Class in TD composer:

@media (max-width: 767px){
    .my-custom-hidden-mobile {
        display: none;
    }
}

@media (min-width: 768px){
    .my-custom-visible-mobile {
        display: none;
    }
}

Now it works as expected. I get shortcode of the flex block and I insert it in many various posts on my site. They are properly hidden on mobile screens (or visible on bigger screens only).

• This reply was modified 3 years by Sergey.