- ApiPractical example – How to add a new Block and Module
- Apitd_api_thumb::update
- Apitd_api_thumb::add
- ApiAPI – Thumbnail – Introduction
- Apitd_api_module::delete
- Apitd_api_module::update_key
- Apitd_api_module::update
- Apitd_api_module::add
- ApiAPI – Modules – Introduction
- Apitd_api_block::delete
- Apitd_api_block::update_key
- Apitd_api_block::update
- Apitd_api_block::add
- ApiAPI – Blocks – Introduction
- ApiUsing the Theme API in plugins
On most of my new front page (under development at https://moic.onlineinvestmentconference.com/) I’m using FB4’s which work out well in sizing t’nails in the correct aspect ratio (all my tnails are 2:1). But I have used a Block 7 at the top of the page adjacent to my slider, because I didn’t want the large image at the top of an FB 7 to compete with my slider image. But Block 4 doesn’t have the image preset I can use with FB7’s (18:9), so the sides of the t’nails get cutoff.
Can I configure an FB7 to have only 4 small t’nails in a vertical column, like I can do with a Block 4?
https://arumbuonline.com/ Installed Magazine Pro Demo. But website not properly loading with Bigflex and slider
Hello,
As I said above, you can’t filter the block Posts Loop, you can only sort it =>https://www.screencast.com/t/geckLSYd5sa, so if you have set the Posts Loop on the homepage, then will display all post of all categories, if you have set the Posts Loop set on the category template, then will display the posts only from that category.
If you need a block that can filter you can use a flex block.
Thank you!
it should be like using the big flex category where you can filter
Hello!
You can create a category named “Featured” and on flex blocks you can filter to show posts only from that category.
Thank you!
Hello!
Take a look here: https://wordpress.org/support/article/formatting-date-and-time/
This could help you to set the format which is suitable for your needs, also for flex blocks it should working if you have the setting show date enabled also for mobile viewport: https://www.screencast.com/t/XDQJedlggSB
Thank you!
Hello!
Please check our documentation here: https://forum.tagdiv.com/flex-block-settings-guide/
You can also set there a filter for posts by writing there the ID of the category which you want to include and you can write -ID for the one you want to exclude.
Please check this screenshot: https://www.screencast.com/t/UbXegeIBXEg
Unfortunately, it is not possible to exclude by their slug or if you have that case with 2 categories, then the post will be displayed if another category has been in the settings.
Thank you!
Hi,
I am reading this tutorial https://forum.tagdiv.com/featured-posts-2/ and cannot find the default Featured post category in my categories list.
Should i just create this category by myself and functionality will work (for example I will be able to use flex box filtering method by featured posts?).
Hello !
Yes, you can achieve that using tagDiv Composer but you will have to use a Cloud library template. You can see here that you have the option to divide a row in multiple columns. Flex Blocks are the most customizable blocks: https://www.screencast.com/t/EUyGSfxItTb
You will have to start by adding a ROW and divide it: https://www.screencast.com/t/Zb3eyHQ0E
After this you can add a flex block in it: https://www.screencast.com/t/6UM5LmHT5G2 with this settings: https://www.screencast.com/t/EUyGSfxItTb
I hope this helped.
Thank you !
Hi,
I am checking settings for flex block 1. In the layout tab and article image section in the image size dropdown I see only thumbnail sizes defined on the newspaper theme panel.
I do not see thumbnail sizes from wordpress standard Settings->Media page. Does it mean I should set all of those standard wordpress to 0 so that they are not generated? As anyway I cannot use them? That would save some hosting space.
I wanted to create 500px no crop thumbnail for my project as the standard Newspaper medium default size (696px) is too big for me and others are too small (300px). Is there a way to do it?
Thanks!
Hello Bogdan,
If you want to continue using blocks that are in the widgets, then you need to change block 2 with block 4 => https://www.screencast.com/t/of4bU5RffH , or you can add flex block 1 added with tagDiv Composer => https://www.screencast.com/t/M0frT2GZf1LU
Hope this helps you!
Thank you!
Hello,
Our theme doesn’t have the option for Sticky Posts, you also need to set the ids of the posts you want to display in flex block => https://www.screencast.com/t/pYCXEJ1LowCZ -> https://www.screencast.com/t/iB9hpqsash
Thank you!
Hello,
If I understood it correctly, a solution could be to use the unique article option, follow this guide: https://forum.tagdiv.com/unique-articles/
This option automatically removes duplicate posts from the page.
Also, you can apply filer on flex blocks => https://forum.tagdiv.com/flex-block-settings-guide/
Thank you!
Hello!
That element presented in this demo is called ” Big grid flex block “.
Unfortunately, we don’t have a carousel in our theme.
Thank you!
Hi,
is there a way in “filters menu” of Flex Block 2 to set to show only Sticky Posts from all Categories?
Regards
hi,
i am using a flex-block 3 as you can see here: https://prnt.sc/11fg7d1
This are my settings for this specific flex-block: https://prnt.sc/11fgaon
PROBLEM: When i click on 1 of the pagination arrows then the spinning icon appears and normally there should appear new posts but i can always see just the same posts. they do not change. no matter how often i click on the pagination arrows the posts always remain the same.
any idea? thanks!
Hello Vlad!!
Thanks for your help! Despachos page is working properly. Regarding Home Page, I’ve changed the part of Flex Block 1 > General > Extra > Offset posts > NOTHING. (It was set as “14”. Now it’s showing the last one. Hope this way is ok!
Thanks a lot for your help!!
Hello!
Please provide me a screenshot with your full settings on that element in order to help you.
Also, check our documentation here: https://forum.tagdiv.com/flex-block-settings-guide/
Thank you!
Hello,
To remove the author/date/comments on block 12 you need to go in Theme Panel -> Block Settings -> Meta info on Modules/Blocks => https://www.screencast.com/t/b4kXjK7deT01
The number pagination is only for an element called “Posts Loop” =>https://www.screencast.com/t/n6dOYgT3 and the flex blocks do not have this option.
Hope this helps you!
Thank you!
Hello!
On a category page will display also the posts from subcategories 1,2,3..etc how many posts the category has. On a subcategory however it will display only the posts from that subcategory.
If you want to add an element for example flex block, then you can filter some posts like this:
1. Post ID filter => add posts by IDs
2. Category filter => choose a category from which to display posts
3. Multiple taxonomies filter => choose multiple categories from which to display posts
4. Filter by tag slug => add posts by category name
5. Multiple authors filter => specify ID authors from which to display posts
6. Post Type => specify post type, for example if you have custom posts
7. Sort order => you can choose in which order you want to display posts
Thank you!
Hello There Support
I trust you are keeping well.
I am trying to use my flex box 1 category filter to bring up a post within a specific selected category, but when I select the category it shows no posts, and the category has posts assigned to it already?
Please let me know if you can assist me with this?
Kindest Regards,
Oliver
Hi, how do I manage the size of the “Big Grid Flex 1” on mobile devices? Each panel is far too big and takes up the entire screen on mobile. As seen here: https://ibb.co/XXrWwtf
Also, is there any way of controlling the position of the text within this section for all devices? For example, I would like the text to sit in the bottom left hand corner of each panel, 20px away from each edge.
Web page: https://firstcardev.wpengine.com/buying/
I put the widget big grid flex 10 its totally work in editor but not showing in the live page
Hello!
2. On a category page will display also the posts from subcategories 1,2,3..etc how many posts the category has. On a subcategory however it will display only the posts from that subcategory.
If you want to add an element for example flex block, then you can filter some posts like this:
1. Post ID filter => add posts by IDs
2. Category filter => choose a category from which to display posts
3. Multiple taxonomies filter => choose multiple categories from which to display posts
4. Filter by tag slug => add posts by category name
5. Multiple authors filter => specify ID authors from which to display posts
6. Post Type => specify post type, for example if you have custom posts
7. Sort order => you can choose in which order you want to display posts
3. I just explained you above why that setting is not visible on your website, please read once again.
7. Your correct sidebar is an element called ” Social counter ” , so just edit the wrong page with the wrong sidebar and insert the same element there called ” Social counter “. In the end, you have the same sidebar.
9. I can see in that “Posts loop” element an offset, please delete the value from there and let the field empty.
Thank you!
Hello !
The latest articles option and related posts come from WordPress not from Newspaper Theme. You can disable it from here as you can see: https://www.screencast.com/t/uzXRgXTiHlH You can disable that and replace it with a Flex block that has more editing options.
Thank you !
