Search Results for 'system status'

Hello,

Please check the system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/requirements-for-newspaper/

Thanks for your understanding!

Hi,

So you have problems using the composer. The first thing to check would be the theme requirements, system status section
– https://forum.tagdiv.com/requirements-for-newspaper/
It is imperative that the parameters mentioned in the guide are configured properly. Insufficient resources can cause many issues with the theme or the plugins, if needed ask your hosting provider to increase them as specified. Then check if the issue is solved, chances are it will be.

If there is no need for modifications in that matter, in some cases the solutions from these topics worked for composer problems, you could give them a try if possible
– https://forum.tagdiv.com/topic/gray-page-tagdiv/ (this worked in many cases)
– https://forum.tagdiv.com/topic/javascript-error-td-composer-wont-load/

Let us know if any of these suggestions fixed the problem and which one, or the problem remains.

Thanks

Hello scotte,

Check again your system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/system-status-parameters-guide/ Also, please try the below solution ->

Set up the below code in .htaccess!

<IfModule mod_substitute.c>
SubstituteMaxLineLength 10M
</IfModule>

Hope this helps and let us know how it goes! If the problem is still there, please send us an email at contact@tagdiv.com with your log-in information (wp-admin) so we can take a closer look at your setup page. Also, provide the CPanel access for more further investigations. Also, the link to this conversation is needed so we can quickly identify you.

Thanks.

Hello baldhiker,

First of all, ensure that you have correctly installed the theme via FTP way and check the system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/requirements-for-newspaper/ If the problem is still there, please send us an email at contact@tagdiv.com with your log-in information (wp-admin) so we can further investigate it closer your setup page. Provide there the link to this topic so we can quickly identify you.

Thanks for your understanding!

Hello Amee,

Did you have increased the system status parameters according to our documentation from here -> https://forum.tagdiv.com/requirements-for-newspaper/

Thanks for the message!

Hello scotte,

First of all, make sure that your system status parameters are increased according to our documentation from here -> https://forum.tagdiv.com/newsmag-requirements-for-newsmag/ Most likely, your PHP memory has exhausted and that’s why you cannot say anything.

Thanks for the message!

Hello Portekoi,

Why did you have not followed our useful guide and did not increase the system status parameters? The yellow parameters should have to be increased according to our guide if you want to achieve good results.

Thanks for your understanding!

Those may be insufficient from what I can see in the system status screenshot. It is very important that these values are respected
– https://www.screencast.com/t/aDnEkrDmhw
The WP-memory can be set higher than the recommended 96M if possible. These would be basic requirements for most premium themes. Usually the hosting provider can do this for you, it should be an easy task for them.
There may be problems with the theme and theme plugins if there are insufficient resources.

Hello Kyle_newspaper,

Did you have checked your system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/requirements-for-newspaper/

Thanks for the message!

Hello k49ivanov,

Check your system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/system-status-parameters-guide/ Also, please try the below solution ->

Set up the below code in .htaccess!

<IfModule mod_substitute.c>
SubstituteMaxLineLength 10M
</IfModule>

Hope this helps and let us know how it goes!

Thanks.

Hi,

Did you have checked the system status parameters to be increased according to our documentation from our theme requirements?

Thanks for your understanding!

Hello,

Yes, you will be able to move the theme as the activation can be reset from the system status screen: https://www.screencast.com/t/4Cxx6HoZwxk4

Thank you!

Hello cjolicoeur123456,

Please check the system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/newsmag-requirements-for-newsmag/ Most likely, the PHP memory has exhausted and probably, that’s why you cannot save anything, sorry!

Thanks for your understanding!

Hello Viju,

Check the system status requirements to be according to our documentation from here -> https://forum.tagdiv.com/system-status-parameters-guide/ -> https://forum.tagdiv.com/requirements-for-newspaper/ If the problem is still there, please send us an email at contact@tagdiv.com with your log-in information (wp-admin) so we can further investigate it closer your setup page.

Thanks for your understanding!

Hello aydinmehmet,

Check the system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/requirements-for-newspaper/

Thanks for your understanding!

Hello Amee,

Check your system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/system-status-parameters-guide/ Also, please try the below solution ->

Set up the below code in .htaccess!

<IfModule mod_substitute.c>
SubstituteMaxLineLength 10M
</IfModule>

Thanks.

Hello oilhavense,

Check your system status parameters to be increased according to our documentation from here -> https://forum.tagdiv.com/system-status-parameters-guide/ Also, please try the below solution ->

Set up the below code in .htaccess!

<IfModule mod_substitute.c>
SubstituteMaxLineLength 10M
</IfModule>

Thanks.