Hi,
Those ads can be replaced/removed using tagDiv Composer, edit teh page/template and look for the ad box element, usually in the ad box is set in image ad a banner that can be removed or you can replace. Also, check if you have any ad blockers in use, if you use one, please disable it and check again in tagDiv Composer.
Hi sefakoc,
Normally, if you have a PRO demo, then you need to edit the page and cloud template using the tagDiv Composer, then select the social counter element and set the socials you use on it.
Thank you!
Hi,
If you want to edit the website, this can be done using the theme builder tagDiv Composer – https://prnt.sc/L4cSPe37car_
You’ll need to edit it with tagDiv Composer like this -> https://i.imgur.com/i5IUJ9E.jpg add or select a row and stretch it after your needs -> https://i.imgur.com/WKYebPX.jpg -> https://i.imgur.com/TO1BZ3M.png -> https://i.imgur.com/Yq8UCv3.jpg
Thank you!
Hi,
Each theme update uses a specific plugin version. If you update the theme via Newsapper > Updates, the system will remove the current theme and install the new version. After that, the required plugins will normally be removed and reinstalled automatically (as long as nothing interferes with the plugin update process).
Alternatively, you can update the theme and its plugins manually. However, with both methods, there may be a short period (a few moments or minutes) during which the website may not display correctly until all plugins are fully updated.
For this reason, I recommend enabling maintenance mode while performing the theme and plugin updates. Typically, the entire process should only take a few minutes.
Thank you!
Hi,
From your description, it sounds like the issue occurs during theme activation, where it continues to appear as unregistered even after completing the activation process. This is most likely caused by backend caching.
I recommend clearing all caches and temporarily disabling any caching mechanisms until the theme is successfully activated.
If the issue persists, please reach out to us at contact@tagdiv.com and include your WordPress admin access along with the license key. Our team will review the situation and assist you as soon as possible.
Thank you!
Hi,
I just checked the website on mobile and now the header ad is no longer displayed – https://prnt.sc/M1nhiIw9UKIN
Yes, if you want to use the code for tablets too, then just copy and paste the same code in the iPad portrait section.
Hi,
I tested the website on a few gadgets we have and it seems to be ok on all of them – https://i.imgur.com/oT8ezBg.png
To add a bit of button style on the cart page, you can use this custom css:
.cart .wc-block-cart .wc-block-cart__submit-container a
{
background-color: #17c57a;
color: #fff;
border-radius: 4px;
border: 1px solid transparent;
}
.cart .wc-block-cart .wc-block-cart__submit-container:hover a
{
background-color: #0fa062;
text-decoration: none;
}
Hi,
Thank you for the update and for sharing your findings! You’re correct, what happened is that AdBlock was blocking ad elements, which made it seem like they weren’t removable. Once AdBlock is disabled for your site, everything works as expected.
This is entirely due to the browser extension, not the theme. We’ll consider adding a note in our documentation to prevent this confusion in the future.
Thank you!
Hi,
For this, please use this custom css for mobile :
body .td-pb-span12 .alignwide {
width: auto!important;
}
Set the code in the theme panel > custom code > advance css > phone – https://prnt.sc/gmHKEhHeMQeQ
Thank you!
Hi,
This means that you have set a cloud category template. Ok, then another place from were you can add new sidebares is from pages, click on create new page and at the bootom in Page Template settings you’ll see custom sidebar – https://i.imgur.com/nw69Pmu.png
Hi Marcos,
I’m glad that in the end the situation has been resolved.
Hi,
Edit the page with tagDiv Composer, select each image in part and set a caption – https://i.imgur.com/P3P9G8h.png. This can be set under the image or over the image.
Thank you!
Hi,
The ads on the NewsWeek are set using tagDiv Composer on pages and cloud templates and those are rendered by using the element ad box from tagDiv Composer.
Also, all ads that are on our demos are banners so those can be removed or replaced from ad box element from the image ad tab – https://prnt.sc/YeZHo0Pqsa0F
I hope this will help you!
Hi,
The solution that I can offer is to use a custom css that will hide it from the header zone on mobile, the css is:
.td-header-sp-rec {
display: none!important;
}
This should be placed in the theme panel> custom code > advance css > phone – https://prnt.sc/x13Vx2tifJvC
Hello,
I think that you are using the mobile theme plugin for AMP version, right? If so, then you can disable the grids from front and category page using the theme panel settings – https://prnt.sc/JNDTENp7HXR5
Thank you!
Hi,
Ok, I see that you have the default shortcodes from theh woo plugins and not the shortcode from tagDiv Composer, therefore, those are coming with a custom css that has the width set on 1400px instead of 1200px – https://i.imgur.com/e9hNz8a.png
Now the simplest and fastest solution in this case is a stronger css like this one:
body .td-pb-span12 .alignwide {
width: 1200px;
}
This css should be set in the theme panel > custom code > custom css.
I hope this will help you!
Hi,
Unfortunately, this is not helpful. I will need a link to see and inspect exactly what you have in the image. If you can not provide it here in the forum, you can contact us via email at contact@tagdiv.com and provide a temporary wp-admin access and a link to see where the element is as in your screenshot.
Thank you for your understanding!
Hi,
Thank you for sharing your experience with our community.
Best regards,
Calin
Hello,
Normally, a license key is for 1 website. Please check the ThemeForest license specifications here – https://themeforest.net/licenses/standard – https://themeforest.net/licenses/terms/regular -> https://prnt.sc/X0AldIM7e7ni
We allow the key to be used on 2 websites at the same time because we consider that most website owners require a testing website besides the live website, and the theme must be activated there as well.
So, yes, you can activate the license key on staging and later you can activate it on live, and it will work on both without problems.
Thank you!
Hi,
If you do not want to use the tagDiv Composer to create sidebars on pages and use cloud templates and you want to use the standard templates.
You can create new sidebars from the theme panel > categories – https://i.imgur.com/T9xWDXF.png
What you are seeing there are sidebars created by the theme, and they are theme-protected because they are built using the theme options, not the standard WordPress widgets.
To view and add actual widgets, please use the “+” icon, as shown in the screenshots below: https://prnt.sc/Hu-fEadEhjCE – https://prnt.sc/0eVTTyOBf2C1
Thank you!
Hi mrg, the theme has been compatible with PHP 8 for quite some time, so it should work without issues on versions 8.2 and 8.3. It’s possible that other factors were causing conflicts in your setup. Recently, we’ve also seen several users successfully running the theme on PHP 8.4.
Hi,
We’ll check the email as soon as we can.
Thank you!
Hi,
For this process, please contact us via email at contact@tagdiv.com and include your license key in your message.
Once we receive your email, we will review your request and verify the license key. Please note that the process can only be completed if the license key has been used correctly.
Typically, a license key is valid for a single live domain. However, we allow usage on up to two domains to accommodate staging environments, as most websites require one.
ThemeForest license specifications here – https://themeforest.net/licenses/standard – https://themeforest.net/licenses/terms/regular -> https://prnt.sc/X0AldIM7e7ni
Could you provide a link to the template? Unfortunately, the provided screenshot is not enough to understand how the elements have been set.
Hi,
Articles that are displaying the “EXCLUSIVE” tag on blocks are articles that are locked using the tagDiv Optin builder to articles lock – https://forum.tagdiv.com/lockers/ – https://i.imgur.com/KtiKFIo.png – https://i.imgur.com/k9L7hZi.png
Thank you!